The SP Compressor has superb tone quality featuring a wide variety of compressor tones from vintage, to subtle, to modern and more.
the most versatile compressor
from vintage, to subtle, to modern and more
It’s super flexible and features a dry blend knob, up to +15dB of boost and an internal dip switch for attack control.
based on the highly revered
Ross Compressor
Easy to operate and plays well with other pedals (distortion, reverb wah etc).
Run it with the Xotic Voltage Doubler at 15v or 18v for even more headroom!
overview
don’t leave out the grit and growl,add extra dimension to your crunch or lead tone.
A compressor pedal is traditionally used with clean tones but it plays nicely with overdrive and distortion pedals for nice crunchy lead tones.
True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.
BUY NOW
accessories
need more headroom?you got it!
The Xotic “Voltage Doubler” is a step-up converter that takes 9 volts DC and boosts it to an output voltage of 15 or 18 VDC (max current draw 80mA).
Why do you need a voltage doubler? Higher voltage levels result in more headroom. When you boost the voltage your find your Xotic pedals will get much more dynamic, more headroom, top end and brightness, less compressed sound.
GET THE VOLTAGE DOUBLERmore
specs
The SP Compressor can be set forHigh, Medium or Low Compression
| Dimensions (W/D/H): | 3.5" x 1.5" x 1.5" (89mm X 38mm X 38mm) |
|---|---|
| Weight: | 0.57 lbs. (260g) |
| Bypass: | True Bypass Switching |
| Power Consumption: | 9VDC/5mA |
| Battery Type: | 9VDC (006P) x 1 |
| AC Adapter (Optional): | 9VDC-18VDC, Negative Tips (Regulated recommended) |
| Input Impedance: | 1M ohm |
| Output Impedance: | 10k ohm |
| Nominal Input Signal Level: | -20dB (100mVrms) |
WATCH IT IN ACTION
Requests from referer are blocked.